Large Commercial Office
38,000 Square Foot Building With 0.6o ACH
Our team performed an Air Tightness Test on a large commercial building in Oakville, Ontario built by Pearce McCluskey Architects. The building itself is over 38,000 square feet, or 3,500+ square metres on 2 levels. The result was a very impressive 0.60 ACH! A credit to the project team’s attention to detail.
Our team of Energy Advisors (EA) set up 4 sets of blower door equipment at the front of the building in anticipation of a higher ACH result. The building was so tight it only required 2 of the 4 fans to achieve the depressurization needed for the test. The airtightness testing was overseen by our Ontario Assistant Regional Manager, David Hope with assistance from EAs Liana Di Ilio, Mike MacKay and Michael Lagimodiere.
|Label/Certification: –||Heating Load: n/a|
|Location: Oakville, ON||Cooling Demand: n/a|
|Year Completed: 2022||EnerGuide Rating: –|
|Designer/Architect: Pearce McCluskey Architects||Airtightness: 0.6ACH|
|HVAC: –||Slab: CIP Reinforced Concrete|
|Builder: Pearce McCluskey Architects||Above Grade Walls: Aluminum Composite Metal Panel Assemblies|
|Above Grade Floor Area: 38, 475 square feet||Below Grade Walls: n/a|
|Below Grade Floor Area: n/a||Ceiling: Hollow core slab|
|Heat Demand: n/a||Ventilation: Packaged Rooftop Unit|
|Windows: –||Heating/Cooling: Lennox LGH092H4B Gas/Electric|
|Hot Water: –||Renewables: n/a|
|AeroBarrier: –||Drain Water Heat Recovery: –|